SWITCH 26P LAN GIGABIT POE HIKVISION DS-3E1526P-SI 24P POE-2P SFP -POE 370W – L2 SMART MANAGED

Descrizione

SWITCH 26P LAN GIGABIT POE HIKVISION DS-3E1526P-SI 24P POE-2P SFP -POE 370W – L2 SMART MANAGED

Network Parameters
Port Number:
– 24 × Gigabit PoE ports
– 2 × Gigabit fiber optical ports
Port Type: RJ45 port, full duplex, MDI/MDI-X adaptive
Working Mode:
– Standard mode (default)
– Extend mode
Standard: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z
Forwarding Mode: Store-and-forward switching
MAC Address Table: 8 K
Internal Cache: 4.1 Mbits
Switching Capacity: 52 Gbps
Packet Forwarding Rate: 36.688 Mpps

PoE Power Supply
PoE Standard: IEEE 802.3af, IEEE 802.3at
PoE Power Pin: End-span: 1/2(-), 3/6(+)
PoE Port: Ports 1 to 24
Max. Port Power: 30 W
PoE Power Budget: 370 W

Software Function
Port Configuration: Port rate configuration, flow control, and ports enabling
Device Maintenance: Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
Link Aggregation: Static link aggregation supported
Long Range: Up to 300 m transmission
PoE Configuration:
– PoE watchdog: Ports 1 to 24 auto detect and restart the cameras that do not respond.
– PoE enabling: Support
Storm Control: Storm control of unknown unicast, multicast and broadcast
Port Mirroring: Support
QoS: WRR and SP scheduling and port priority
VLAN: 4094 VLANs
STP: STP and RSTP protocols
Port Isolation: Ports in isolation group cannot communicate with each other.
LLDP: LLDP protocol supported for port configuration, global configuration and neighbor discovery
Port Rate-Limiting: Rate-limiting for ingress and egress ports
SNMP: SNMPv1 and SNMPv2c supported for obtaining node information of the system and interfaces

General
Dimension (W × H × D): 440 mm × 221 mm × 44 mm (17.32” × 8.7” × 1.73”)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Gross Weight: 3.535 kg (7.79 lb)
Net Weight: 2.975 kg (6.56 lb)
Power Consumption In Idle: 30 W
Shell: Metal material
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Operating Humidity: 5% to 95% (no condensation)
Power Supply: 100 to 240 VAC, 50/60 Hz, Max. 6.3 A
Max. Power Consumption: 400 W
Relative Humidity: 5% to 95% (no condensation)

Approval
EMC: FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (AS/NZS CISPR 32: 2015)
Safety: UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017)
Chemistry: CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)